BOX 25 - Kits 97-98-99-100

Kit 97 - RIGHT REAR QUARTER WINDOW

Parts of number 097

  • 97A Right rear quarter window 
  • 97B Upper right rear hinge 
  • Screw AM M 1.7 x 4 mm (x 3) 
  • Screw SM M 1.7 x 3 mm (x 2) 
Step 1
Position the right rear quarter window (97A) on the central body (93A) by first inserting the upper part (red arrow), then secure the window with two AM screws on the lower part (yellow circles).

Step 2

Position the right rear upper hinge (97B) in the opening located on the left upper exterior of the central body (93A) (yellow circle). Keeping it in place, then secure from the inside of the body with an SM screw as shown in the photo.

GENERAL VIEW

Kit 98 - ROOF PANEL

Parts of number 098

  • 98A Roof panel 
  • 98B Roof air intake 
  • 98C Hinges 
  • Screw ZM M 1.7 x 3 mm (x 8) 
  • Screw RM M 1.2 x 2 mm (x 3) 
Step 1

Position the hinges (98C) on the inside of the roof air intake (98B) and secure each with one RM screw. Position the air intake (98B) on the outside of the roof panel (98A) and secure it from below with two ZM screws placed on the hinges (98C).

Step 2

Position the roof panel (98A) on the central body (93A) as shown, then turn the assembly over and secure the panel from the inside with four ZM screws (yellow circles).

GENERAL VIEW

Kit 99 -ROOF INNER PANEL

Parts of number 099

  • 99A Roof inner panel 
  • 99B Air intake grille 
  • 99C Helmet hook 
  • Screw SM M 1.7 x 3 mm (x 5) 
Step 1

Place the inner roof panel (99A), the inner side up. Position the grille (99B) on the square opening. Position the hook (99C) as shown, pushing it into the two openings provided for this purpose (yellow arrows).

Step 2

Turn over the central body part (93A), position the inner roof panel (99A) and secure it with four SM screws as shown (yellow circles).

GENERAL VIEW

Kit 100 - BULKHEAD - FRONT COMPARTMENT

Parts of number 100

  • 100A Bulkhead - front compartment 
  • 100B Support - Front hood  
  • Screw AM M 1.7 x 4 mm (x 3) 
  • Screw CM M 2.0 x 4 mm (x 8) 
Step 1

Position one support  front hood  (100B) into the opening located above the front compartment bulkhead (100A) as shown in the photo, then secure it from the rear with an AM screw.

Step 2

Place the second support (100B) into the opening located above the front compartment bulkhead (100A), then secure it from the rear with an AM screw.

Step 3

Position the front compartment bulkhead (100A) at the front of the central body (93A). Align the  openings at the side and fix the bulkhead (100A) to the central body (93A) with two CM screws on each side (yellow circles). Turn the assembly over and secure – from the inside - the bulkhead (100A) to the body (93A) with two CM screws.

GENERAL VIEW