BOX 12 - Kits 45-46-47-48

Kit 45 - LEFT REAR WHEEL HUB

Parts of number 045

  • 45A Left rear hub 
  • 45B Brake caliper (x 2) 
  • 45C Left hinge #1 
  • 45D Left hinge #2 
  • 45E Rear suspension spring 
  • 45F Upper rear suspension spring bracket 
  • 45G Left rear suspension panel 
  • Screw AM M 1.7 x 4 mm (x 3) 
  • Screw AEM M 2.0 x 8 mm (x 2) 
  • Screw CM M 2.0 x 4 mm (x 3) 
  • Screw DP P 2.0 x 4 mm (x 2)
Step 1
Position the upper rear suspension spring bracket (45F) beneath the left rear link arm (24A) and secure with a DP screw.

Step 2
Position the left rear suspension panel (45G) on the left rear link arm (24A) and secure it with two AM screws.

Step 3
Check that the left rear driveshaft (43C) is correctly positioned, then place the driveshaft bellows (43A) at its end.

Step 4

Position the rear suspension spring (45E) and the left rear hub (45A) as shown in the photo.

Step 5

Secure the left rear hub (45A) to the left rear lower suspension arm (23A) using two CM screws.

Step 6

Position the two left hinges (45C&45D) on the left rear hub (45A) and secure them with an AEM screw.

GENERAL VIEW

Kit 46 - RIGHT REAR WHEEL HUB

Parts of number 046

  • 46A Right rear hub 
  • 46B Brake caliper (x 2) 
  • 46C Right hinge #1 
  • 46D Right hinge #2 
  • 46E Rear suspension spring 
  • 46F Upper rear suspension spring bracket 
  • 46G Right rear suspension panel 
  • Screw AM M 1.7 x 4 mm (x 3) 
  • Screw AEM M 2.0 x 8 mm (x 2) 
  • Screw CM M 2.0 x 4 mm (x 3) 
  • Screw DP P 2.0 x 4 mm (x 2)
Step 1

Position the right rear suspension panel (46G) on the right rear link arm (25A) and secure it with two AM screws.

Step 2

Position the upper rear suspension spring bracket (46F) beneath the right rear link arm (25A) and secure with a DP screw.

Step 3

Check that the right rear driveshaft (44C) is correctly positioned, then place the driveshaft bellows (44A) at its end.

Step 4

Position the rear suspension spring (46E) and the right rear hub (46A) as shown in the photo.

Step 5

Secure the right rear hub (46A) to the right rear lower suspension arm (23B) using two CM screws.

Step 6

Position the two right hinges (46C&46D) on the r rear hub (46A) and secure them with an AEM screw.

GENERAL VIEW

Kit 47 - LEFT REAR SHOCK ABSORBERS

Parts of number 047

  • 47A Shock absorber cylinder (x 2) 
  • 47B Shock piston (x 2) 
  • 47C Upper dust cover 
  • 47D Shock spring (x 2) 
  • Screw UM M 1.7 x 3 mm (x 3) 
  • Screw RP P 1.7 x 3 mm (x 2)
Step 1

Introduce a spring (47D) and then a shock piston (47B) into a shock cylinder (47A). Assemble the second shock cylinder in the same way.

Step 2

Position a shock absorber on the left side of the engine cradle. Secure the upper end of the shock absorber cylinder (47A) to the link arm bracket #1 (24B) using a RP screw. Then attach the lower end of the shock absorber piston (47B) to the left rear hub (45A) using a UM screw.

Step 3

Position the second shock absorber on the engine cradle. Fix the upper end of the shock absorber cylinder (47A) to the link arm support #2 (24C) using a RP screw.

Then secure the lower end of the shock absorber piston (47B) to the left rear hub (45A) using a UM screw.

Step 4

Position the upper dust cover (47C) according to the photo.

GENERAL VIEW

Kit 48 - RIGHT REAR SHOCK ABSORBERS

Parts of number 048

  • 48A Shock absorber cylinder (x 2) 
  • 48B Shock piston (x 2) 
  • 48C Upper dust cover 
  • 48D Shock spring (x 2) 
  • Screw UM M 1.7 x 3 mm (x 3) 
  • Screw RP P 1.7 x 3 mm (x 2)
Step 1

Having assembled the two shock absorbers as described above (see step 47- 1), place the first shock absorber on the right side of the engine cradle. Fix the upper end of the shock absorber cylinder (48A) to the link arm support #2 (25C) using an RP screw. Then attach the lower end of the shock absorber piston (48B) to the left rear hub (46A) using a UM screw.

Step 2

Position the second shock absorber on the engine cradle. Fix the upper end of the shock absorber cylinder (48A) to the link arm support #1 (25B) using a RP screw. Then attach the lower end of the shock absorber piston (48B) to the left rear hub (46A) using a UM screw.

Step 3

Position the upper dust cover (48C) according to the photo.

GENERAL VIEW