BOX 31 - Kits 121-122-123-124

Kit 121 - REAR BONNET

121A Rear bonnet
121B Left hinge

121C Right hinge
Screw AM M 1.7 x 4 mm (x 3)

Step 1

Place the left-hand hinge (121B) in the left top recess of the rear bonnet (121A). Turn the assembly over and secure the hinge with an AM screw.

Step 2

Position the right-hand hinge (121C) in the right top recess of the rear bonnet (121A). Turn the assembly over and secure the hinge with an AM screw.

GENERAL VIEW

Kit 122 - REAR AIR INTAKE

122A External air intake
122B Internal air intake

Screw AP P 1.7 x 4 mm (x 3)

Step 1

Assemble the two parts of the air intake (122A&122B), ensuring that the mounting points are positioned in the corresponding housings. Secure the assembly with two AP screws.

GENERAL VIEW

Kit 123 - REAR SPOILER

123A Rear spoiler
123B Number plate illumination

123C Adhesive tape
Screw AM M 1.7 x 4 mm (x 5)

Step 1

Turn the rear spoiler (123A) as shown in the picture and insert the number plate light (123B) with the transparent part facing outwards.

Step 2

Separate the H1-1 cable (19B) from the rest of the wiring.

Bend the LED connections using pliers and insert the H1-1 cable lightning license plate (19B) into the housing provided beneath the rear spoiler (123A). Secure the cable with adhesive tape (123C) as shown.

Step 3

Pass the cable (19B) through the central rectangular opening in the rear bonnet (121A), working from the outside inwards. Position the rear spoiler (123A) on the rear bonnet (121A), aligning the mounting points with the corresponding openings (yellow circles). Turn the assembly over and secure the spoiler with four AM screws.

GENERAL VIEW

Kit 124 - REAR GRILLE

124A Rear grille
124B Left rear light
124C Right rear light

124D Adhesive tape (x 5)
Screw AP P 1.7 x 4 mm (x 3)
Screw QM M 1.7 x 3 mm (x 8)

Step 1

Position the rear grille (124A) on the rear bonnet (121A) and secure it with eight QM screws (yellow circles).

Step 2

Place the left rear light in the housing located on the rear grille (124A) and the rear bonnet (121A), and secure it from the inside using an AP screw.

Step 3

Position the right rear light in the housing located on the grille (124A) and rear bonnet (121A), and secure it from the inside using an AP screw.

Step 4

Disconnect cables H1-2 (19C) and H1-3 (19D) from the vehicle wiring harness. Also disconnect cable H1-4 (19E).

Step 5

The H1-2 cable (19C) includes two LEDs. Insert the first LED into the top opening (red) of the left rear light. Then insert the second LED into the top opening (red) of the right rear light. Insert the LED from cable H1-3 (19D) into the lower opening (orange) of the left rear light. Insert the LED from cable H1-4 (19E) into the lower opening (orange) of the right rear light.