BOX 22 - Kits 85-86-87-88

Kit 85

85A Air intake
85B Windscreen wiper
85C Rear-view mirror shell
85D Rear-view mirror support

85E Rear-view mirror
85F Door lock, left
85G Door lock, right
IM Screw M 1.7 x 3.5 mm (x 3)

Installation of bodywork accessories and mounting of the interior rear-view mirror

Step 1

Position the air intake (85A) below the body (80A). Position the right (85G) and left (85F) door locks to the body (80A) and secure with two IM screws.

Step 2

The right (85G) and left (85F) door locks are mounted on the body (80A).

Position the wiper (85B) on the body (80A).

Step 3

Remove the paper protector from the mirror (85E) and stick it inside the mirror shell (85C). Place the mirror support (85D) on the mirror shell (85C).

Step 4

Carefully put the assembled mirror aside for installation in the next step.

ASSEMBLY DIAGRAM

GENERAL VIEW

Kit 86

86A Lower hinge
86B Top hinge
86C Door light
86D Lock
86E Pin (long)

86F Pin (short)
86G Latch
86H Release button
86I Spring
IM Screw M 1.7 x 3.5 mm (x 2)

Assembly and installation of the left door lock and door light

Step 1

Insert the long pin (86E) into the locking body (86D). Position the spring (86I) and latch (86G) on the long pin (86E).

Step 2

Align the latch pin (86G) with the locks (86D), then insert the short pin (86F). Position the release button (86H) on the long pin (86E).

Step 3

Press the release button (86H) to ensure that the latch (86G) swings out.

Position the lock assembly (86D) at the rear of the left door (1A) and secure with an IM.

Step 4

Press the release button (86H) again to ensure that the latch (86G) still swings out correctly.

Position the door light (86C) on the left door (1A) ensuring that the light is pointing forward.

ASSEMBLY DIAGRAM

GENERAL VIEW

Kit 87

87A Window
87B Ventilation window
87C Mounting tab
87D Spring
87E Mounting tab

BM Screw M 2.0 x 4 mm (x 5)
JM Screw M 2.0 x 5 mm (x 3)
NM Screw M 2.0 x 7 mm (x 2)
QM Screw M 1.2 x 3 mm (x 9)
RM Screw M 2.0 x 3 mm (x 2)

Assembly and installation of the left door. Interior mirror assembly

Step 1

Position the ventilation window (87B) on the window (87A) using its three lugs. Position the window (87A) on the left door (1A) and secure it with seven QM screws.

Step 2

Position the lower hinge pin (86A) in the cradle slot on the body (80A), place the mounting tab (87C) on top and secure with an RM screw at one side. Secure the other side of the mounting tab (87C) to the body (80A) with an NM screw through the spring (87D). Do not overtighten the NM screw to allow the spring (87D) to compress.

Step 3

Position the top hinge pin (86B) in the cradle slot on the body (80A), place the mounting tab (87E) on top and secure with two JM screws.

Step 4

Position the left door (1A) onto the body (80A) and engage the latch (86G) into the lock (85F).

Insert the lower (86A) and top (86B) hinges into the left door (1A) and secure them with four BM screws.

Step 5

Attach the mirror with its support (85D) to the slot in the ceiling inside the body (80A). Press the release button (86H) to check that the left door (1A) opens correctly as detailed later on.