BOX 32 - Kits 125-126-127-128

Kit 125 - REAR WINDOW

Parts of number 125

  • 125A Rear window 
  • 125B Rear window reinforcement 
  • Screw AM M 1.7 x 4 mm (x 10) 
Step 1
Place the rear bonnet (121A) with the inner side facing upwards, then position the rear window (125A) as shown and secure it with six AM screws.

Step 2
The rear window reinforcement (125B) has two openings at one of its ends. Place this part with the 2 openings in front of the rear grille (124A) and secure the reinforcement (125B) with two AM screws.

GENERAL VIEW

Kit 126 - LEFT REAR AIR INTAKE

Parts of number 126

  • 126A Left rear air intake 
  • 126B Grille 
  • Screw AM M 1.7 x 4 mm (x 5) 
Step 1

Place the left rear air intake (126A) with the inner side facing upwards, then insert the grille (126B) into the slots.

Step 2

Position the air intake (126A) on the rear bonnet (121A) as shown, then secure it from the inside with two AM screws (yellow circles).

Step 3

Position the interior air intake (122B) as shown in the photo and secure it with two AM screws (yellow circles).

GENERAL VIEW

Kit 127 - RIGHT REAR AIR INTAKE

Parts of number 127

  • 127A Right rear air intake 
  • 127B Grille 
  • Screw AM M 1.7 x 4 mm (x 3) 
Step 1

Place the right rear air intake (127A) with the inner side facing upwards, then insert the grille (127B) into the slots.

Step 2

Position the air intake (127A) on the rear bonnet (121A) as shown, then secure it from the inside with two AM screws (yellow circles).

GENERAL VIEW

Kit 128 - LEFT REAR MUDGUARD

Parts of number 128

  • 128A Left rear mudguard 
  • 128B Mud flap 
  • 128C Mud flap reinforcement 
  • Screw AM M 1.7 x 4 mm (x 5) 
  • Screw UM M 1.7 x 3 x 5.5 mm (x 3) 
  • Screw RP M 1.7 x 3 x 5.5 mm (x 2) 
  • Screw SM M 1.7 x 3 mm (x 3)
Step 1

Place the mud flap (128B) on the outside of the mudguard (128A) and secure it with an RP screw.

Step 2

Position the mud flap reinforcement (128C) into the two openings provided on the mud flap (128B). Secure the reinforcement with two UM screws from the inside of the mudguard (yellow circles).

Step 3

Position the mudguard (128A) on the left side inside the rear bonnet (121A). Align the lug located on the hood with the hole in the mudguard (red circle), then secure it with two SM screws (yellow circles). Then attach the mud flap reinforcement (128C) to the rear bonnet (121A) with two AM screws (yellow circles).

GENERAL VIEW