BOX 18 - Kits 69-70-71-72

Kit 69 - Installing the roof lining and rear quarter window control latches

Parts of number 69

  • 69A Roof lining 
  • 69B Left quarter window latch 
  • 69C Right quarter window latch 
  • 69D Button (x 2) 
  • Screw AGM M 2.0 x 3 mm (x 5) 
Step 1
Turn the body over (66A) and position the right latch of the quarter window (69C) on the inside of the right quarter window located at the rear of the body (66A).

Step 2

Detach a button (69D) from the sprue and place the button on the right control  latch (69C) on the outside of the right quarter window.

Step 3

The right latch (69C) and button (69D) are now fixed onto the right rear window of the body (66A).

Step 4

Once again turn the body (66A) over and position the left latch (69B) on the inside of the left quarter window located at the rear of the body (66A).

Step 5

Detach a button (69D) from the sprue and place the button on the left control latch (69B) on the outside of the left quarter window (illustrations opposite and below).

Step 6

Position the roof lining (69A) on the interior part of the bodywork (66A) passing behind the right (69C) and left (69B) latches, then secure with four AGM screws.

ASSEMBLY DIAGRAM
GENERAL VIEW

Kit 70 - Assembling and mounting of the left sun visor

Parts of number 70

  • 70A Sun visor bracket 
  • 70B Sun visor rod 
  • 70C Left sun visor 
  • Screw NP M 1.2 x 4 mm (x 4) 
Step 1

Engage the rod (70B) in the central opening of the support bracket (70A). Slide the left sun visor (70C) into the rod (70B).

Step 2

Place the left sun visor support bracket (70A) at the left front corner of the roof lining (69A), then secure it with three NP screws.

ASSEMBLY DIAGRAM
GENERAL VIEW

Kit 71 - Assembling and mounting of the right sun visor

Parts of number 71

  • 71A Sun visor bracket 
  • 71B Sun visor rod 
  • 71C Right Sun visor 
  • Screw NP M 1.2 x 4 mm (x 4) 
Step 1

Engage the rod (71B) in the central opening of the support bracket (71A). Slide the right sun visor (71C) into the rod (71B).

Step 2

Place the right sun visor support bracket (71A) at the right front corner of the roof lining (69A), then secure it with three NP screws.

ASSEMBLY DIAGRAM
GENERAL VIEW

Kit 72 - Assembling and mounting of the interior mirror

Parts of number 72

  • 72A Mirror pivot arm 
  • 72B Ball joint 
  • 72C Rearview mirror 
  • 72D Support plate 
  • 72E Rearview mirror 
  • 72F Mirror support 
  • Screw MP M 1.2 x 3 mm (x 3) 
Step 1

Place the ball joint (72B) into the mirror (72C), then place the support plate (72D) from above into the recess provided on the mirror.

Step 2

Remove the backing paper from the back of the mirror (72E) (blue arrow) and affix it to the rearview mirror (72C).

Step 3

Engage the pivot arm (72A) into the center opening of the mirror support (72F).

Step 4

Place the pivot arm (72A) into the ball joint (72B).

Step 5

Remove the transparent protective film from the rear-view mirror (72E) (blue arrow).

Step 6

Position the mirror support (72F) on the roof lining (69A), then secure it with two MP screws.

ASSEMBLY DIAGRAM
GENERAL VIEW